PLAS-T-COTE ROOF SEALER 3.785 Litres
The Plas-T-Cote proofing is designed for all metal roofs and hard roof surfaces.
With a scraper remove all loose coating or caulking from you roof. The roof must be clean of all loose material. Remove all grease and other foreign matter with mineral spirits or other similar solvent. New galvanized or aluminium roofs should be etched for maximum adhesion.
Be sure your roof is dry before applying Plas-T-Cote.
Plas-T-Cote can be applied with either a Stiff Brush or Trowel. You must apply an even coat no more than 1/8" (3.2mm) thick. Plast-T-Cote Alkyd Fibered covers up to 1.2 square metres per litre of roof area.
Cover the roof surface evenly giving special attention to screw heads, seams, vents and stacks. Plas-T-Cote will surface dry in 2 to 4 hours depending on weather conditions.
By following these procedures and using the proper amount of Plas-T-Cote you will get maximum weather protection plus sound proofing, insulative heat reflection and years of protection for your investment.